Design and Analysis of Hydraulic Scissor Lift Using PTC CREO Simulate

Authors

  • Puneet Channi Department of Mechanical Engineering, Thapar University, Patiala, India
  • Jay Prakash Tripathi Department of Mechanical Engineering, Thapar University, Patiala, India

Keywords:

Creo Simulate 6.0, Hydraulic scissor lift, Pantograph, Von Mises Stress

Abstract

This paper is mainly focused on calculation of the forces acting on the different joints of the Hydraulic Lift when it is extended and contracted. Generally, a hydraulic scissor lift is used for lifting and holding heavy weights or heavy components. The design is carried out by considering Hydraulic lift as portable, compact and suitable for mild load types. Drafting and drawing of the hydraulic scissor lift is carried out using PTC CREO for modelling of the parts and the final assembly and then model is imported to the inbuilt simulation software of the PTC CREO i.e. CREO Simulate for meshing and static analysis. Von Mises Stress and Maximum Displacement were given the emphasis and all other responsible parameters were analyzed to check the compatibility of the design values.

Downloads

Download data is not yet available.

Downloads

Published

16-02-2021

How to Cite

[1]
P. Channi and J. P. Tripathi, “Design and Analysis of Hydraulic Scissor Lift Using PTC CREO Simulate”, IJRESM, vol. 4, no. 2, pp. 56–61, Feb. 2021.

Issue

Section

Articles