Analysis on ANSYS 19.0 and Fabrication of Portable Packet Unit


  • Sammed Gani Department of Mechanical Engineering, KLS Gogte Institute of Technology, Belagavi, India


Counteract plates, Scuff and stuff management


Our project proposal is aluminum counteract plate’s carrier which comprises of a hollow aluminum pipe casing. The L bend is soldered at the free end of the main frame. The frame connects to the lower cross bar at the bottom end and the shoulder cross bar height. The bent hook is linked to the upper shoulder cross bar which latches into the shoulder. The wheels are attached to the bottom end of the frame so that we be able to incorporate the offset plates on horizontal outward. The flat load tray is hinged to the lower cross bar that remainder on the free end of the L Bend. The Telescopic legs are supplied that are implanted in the hollow key frame supplied with side space. This component be able to be applied involve the offset plates from one location to another on normal road and in multiple floor building, thus decreasing the rejections via scuff and inappropriate stuff management.


Download data is not yet available.




How to Cite

S. Gani, “Analysis on ANSYS 19.0 and Fabrication of Portable Packet Unit”, IJRESM, vol. 3, no. 12, pp. 111–117, Dec. 2020.