Transient Stability Improvement of IEEE 9-Bus System Using Static Var Compensator

Authors

  • Manish Shrivastava Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India
  • Vinay Prakash Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India
  • Vishal Kaushik Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India
  • Vivek Kumar Upadhyay Department of Electrical and Electronics Engineering, Galgotias College of Engineering & Technology, Greater Noida, India

DOI:

https://doi.org/10.47607/ijresm.2021.663

Keywords:

IEEE 9-BUS system, MATLAB software, power system stability, power system stabilizer (PSS), Static Compensator VAR

Abstract

With increase in power demand over the last few decades, there has been a great expansion in power generation & transmission. But due to various disturbances, improper loading and environmental conditions the power systems are working near their stability limits which have become a power-transfer limiting factor. This in turn poses a threat to the stability of the system. Transient stability has been considered as one of the most important stability for a power system. In this paper Static VAR Compensator (SVC) has been discussed for reactive power control and hence improvement of transient stability and voltage profile. This paper incorporates IEEE-9 BUS test system with SVC controller using MATLAB Simulation.

Downloads

Download data is not yet available.

Downloads

Published

26-04-2021

Issue

Section

Articles

How to Cite

[1]
M. Shrivastava, V. Prakash, V. Kaushik, and V. K. Upadhyay, “Transient Stability Improvement of IEEE 9-Bus System Using Static Var Compensator”, IJRESM, vol. 4, no. 4, pp. 98–102, Apr. 2021, doi: 10.47607/ijresm.2021.663.